• Home
  • Guitars
  • Amps
  • Effects - FX
  • Testimonials
  • Blog
  • About
  • Contact

JMP GUITARS TUBE AMPLIFIERS

Hand Made Guitar Amps

At JMP Guitars we focus on tone, plain and simple. Ironically, when it comes to amplifiers, plain and simple gives you the best tone! The less junk in your signal path translates to less junk stealing your tone. With that in mind, we build our amps based on classic amp circuits, with only top quality components.

our amplifiers are made by hand with special attention to detail and tone. Our transformers are from top manufacturers only, no budget garbage, just top quality made in the USA (standard) or Canada (by request). If you have a request for specific components to be used in one of our amp designs, just shoot us an email on our contact page and we can work out a price quote. Our amplifiers have no numbers, no presets, no gimmicks. Pure tone. Plug in. Crank it up.

In addition to all of the tone tweaks we offer, we can also custom design your faceplate for your own unique look. We have artists and graphic designers available to customize just about any graphic design for your one-of-a-kind amplifier.

Classic 18 Watt Style Tube Guitar Combo Amp with Reverb

SL2TMBR - 18 Watt Tube Guitar Combo Amp with Reverb

The SL2TMBR combo is a sweet amp with shimmering reverb and classic touch-sensitive tone. Full TMB (Treble Middle Bass) controls give you the ability to tweak your sound exactly as you want with the addition of the Bright/Fat switch to accommodate humbuckers or single-coils that fall a little flat in their tone. The tube driven reverb gives a fantastic warm reverb from subtle to surf, the reverb has you covered.

Weight and Dimensions (roughly): Width: 24" W x 21" H x 9" D (includes feet, not handle), about 45 lbs.

DEMO: http://youtu.be/UZ1X5SdKnLc

TNB All Tube High Gain Amplifier

TNB - High Gain EF86 Tube Amp

The TNB head is all about classic tone, with a crisp high gain edge. The amp gives you clean to crunch, right from the volume knob. Adjust the tone knob where it sounds best with your guitar, for the way you play, and just rock out.

Weight and Dimensions (roughly): 18" W x 9.5" H x 9.5" D (includes feet, not handle), about 18 lbs.

WTNB Tube Reverb Amplifier by JMP Guitars

WTNB Combo - High Gain British Style Amplifier with Reverb

The WTNB is a combo version of the TNB head, and adds a sweet, moist, and depth controllable reverb into the circuit. The result is an unbelievable tone for everything from surf rock to heavy metal leads.

Weight and Dimensions (roughly): Width: 24" W x 21" H x 9" D (includes feet, not handle), about 44 lbs.

DEMO: http://youtu.be/rTnYIxtAhVg

JMP Guitars Tube Amplifier

WANT Head - Classic British Style Amp with Reverb and Master Volume

This is a fantastic example of a soulful classic tone, with great cleans and smooth overdrive. This amp includes a master volume knob to play at lower levels and blend between preamp and power amp overdrive tones. The tube-driven reverb is so luscious and juicy you can swim in it.

Weight and Dimensions (roughly): 18" W x 9.5" H x 9.5" D (includes feet, not handle), about 18 lbs.

JMP Guitars Tube Amplifier

ANT Head - Classic British Single Channel with Master Volume

This amplifier is the same circuit as the WANT head but without the reverb, for those purists that just want their guitar tone and no effects onboard.

Weight and Dimensions (roughly): 18" W x 9.5" H x 9.5" D (includes feet, not handle), about 18 lbs.

JMP Guitars Tube Amplifier

WBD Combo - Classic Tone, Modern Tweaks

The WBD combo is a great all-around performer amp, made especially for those of you who need the extra EQ knobs to tweak your tone. The solid design of this amp, along with it's master volume knob allow you to get all kinds of different overdrive tones, even at low bedroom levels. But watch out, when you crank this thing up, it SCREAMS! ...and so will your neighbors, so be careful.

This amp includes: ClassicTone Transformers, SoZo Capacitors, JJ Electrolytic Capacitors, and all top quality components.

This rare amp is the only unit to use the graffiti logo instead of the standard nameplate*.